Bitaxe is a fully open-source hardware Bitcoin ASIC miner. Ultra is the 3rd major revision of the Bitaxe that includes the BM1366 ASIC chip from Antminer S19XP. Supra is the 4th revision that includes a BM1368 ASIC Chip from Antminer S21. A 5V DC power supply with 2.1/5.5mm barrel jack connector is included with Bitaxe. US to EU plug adapter included with all overseas orders.
Powered by the AxeOS, an open-source firmware that gives you full control over your mining. Change settings and monitor performance on a modern web-interface.
Bitaxe is a proven winner, having found multiple blocks in 2024 and 2025!
Comes with 14-day full refund/return Altair warranty.
Goals
- Standalone: can mine directly to your pool over WiFi. No External computer needed.
- Embedded: low cost, low maintenance, high availability, high reliability, low power.
- ASIC: based on the very efficient BM1366/BM1368/BM1370 from Bitmain.
- Versatile: solo/pool mining, autotune power/heat/efficiency.
Features
- ESP32-S3-WROOM-1 Wi-Fi microcontroller on board
- TI TPS40305 buck regulator steps down the 5V input to power the ASIC
- Maxim DS4432U+ current DAC digitally adjusts the ASIC core voltage
- TI INA260 power meter measures the input voltage and current of the miner
- Microchip EMC2101 PWM controls the fan and monitors tach output.
- 0.91″ SSD1306 OLED I2C Display
Good
Bitaxe Ultra
BM1366 ASIC from S19 XP
Hashrate: 500 Gh
Efficiency: 21.5 J/T
Better
Bitaxe Supra
BM1368 ASIC from S21
Hashrate: 650 Gh
Efficiency: 18 J/T
Best
Bitaxe Gamma
BM1370 ASIC from S21 XP
Hashrate: 1.1 Th
Efficiency: 15 J/T
AxeSheath Enclosure for Bitaxe
- Designed from the ground up, this 3D printed plastic case protects your Bitaxe by fully enclosing its electronic components.
- Made with PETG for superior durability & heat resistance.
- Snap fit joints make it easy to install or remove, without the need for any tools or fasteners.
- The enclosure is vented on 4 sides to allow for sufficient airflow, even when overclocking.
- Perfectly sized openings for power port, USB connection, and ESP32 antenna.
- Cradles and supports the OLED display
- The back of the Axesheath case fits through the PCB corner mounting holes. Front can be removed to expose the PCB.
Overclocking Heatsinks
Setup Instructions
- Attach the display to Bitaxe PCB (skip this step if you purchased with AxeSheath)
- Plug Bitaxe into the included 5V power supply. Please do not plug any non-approved 12V power since that will permanently damage the device.
- Bitaxe will now attempt to connect to a default network, which it will not find. To configure the Bitaxe use a WiFi capable device such as a Phone or Laptop and search for the new WiFi Access point Bitaxe_XXXX. Connect to the Bitaxe SSID and you should be prompted for or redirected to the AxeOS web portal. If this does not happen after you connect to the Bitaxe, open your browser and visit http://192.168.4.1
- When you see the AxeOS web portal click on the ‘settings’ button
- Configure the WiFi SSID and password for your local WiFi network (Note: Bitaxe is not compatible with 5Ghz Wifi, it only works with 2.4Ghz WiFi). Double check your WiFi SSID name and password before entering, to prevent manual recovery later.
- If your device has the primary pool as stratum.kano.is this pool requires users to setup an account and using the account name. You cannot simply change the Bitcoin address. We recommend changing the Stratum URL to ckpool or publicpool for solo mining if you do not wish to setup an account with Kano.
- Click Save, then click restart to apply the changes.
- Done! If everything is configured correctly your Bitaxe will start mining. You can re-visit and reconfigure the Bitaxe on your local network by visiting the IP address displayed on the device. You can also press the ‘boot’ button on the device to enable the WiFi access point and connect to it directly at any time. Pressing the ‘boot’ button again will disable the access point.
Setup Tutorial Videos
Introduction Videos
Review Videos
Social Media Posts
Running Bitaxe Gamma! hashing datafree template on Ocean with this bad boy.
Next task: setup Datum 👀 pic.twitter.com/v2ZPCOONfX— Chad Pleb (@chad_pleb) October 26, 2024
Well, only took me 7 years after being introduced to $BTC to start contributing.
— Cris (@Cris_DVM) January 15, 2025
Shoutout
@umbrel for the Home node
@altair_tech for the #BitAxe gamma
Looking at your BitAxe Touch for my nightstand @SoloSatoshi
🍻 pic.twitter.com/JYs98ku8Gl
Running bitaxe
Thank you @altair_tech and all of the open source contributors! Very easy setup pic.twitter.com/rMYo7d0VkW— Pierre Rochard (@BitcoinPierre) October 2, 2024
Good mail day! Thanks @altair_tech 🧡 pic.twitter.com/FASQta8n4O
— Babes who Bitcoin (@babeswhobitcoin) October 31, 2024
Messing around with #Bitaxe from @altair_tech
Replacement Noctua fan runs near silent. pic.twitter.com/y6obQmgKCa— John B ᯅ (@utxoshit) November 5, 2024
The wife got me the best lottery ticket for my birthday. 😍#btc pic.twitter.com/Qvqj5Dys5Y
— Thevin Campton, CCIM | Orlando CRE (@thevincampton) June 6, 2024
Newest arrival! Thanks @altair_tech for the quick delivery 🔥 pic.twitter.com/Qo13hT73zG
— Austin Barnhill (@bh30317) July 16, 2024
Arrived today. Can’t wait to hit a block solo mining. About the same odds as winning $20 with a scratch off lottery ticket, but much bigger payout! pic.twitter.com/MAGjRRcb50
— David Defoe (@defoephoto) June 8, 2024
Running #bitcoin to #hashing for #btc #bitaxe#altair @altair_tech #weminebitcoin pic.twitter.com/u0QZoKkEJh
— JaySingh (@JayJohal4) June 2, 2024
🏆Congratulations to the miner who likely mined the first solo BTC block with a Bitaxe on @ckpooldev with ~500 Gh hashrate!
👏Props to @skot9000, @Public_Pool_BTC & @osmu_global on the project!
You can buy these proven winners here👇
🛒https://t.co/fiEPh4pRA8#WeMineBitcoin pic.twitter.com/C6D9Jj1HlR— Altair Technology® ⛏️ (@altair_tech) July 24, 2024
#Bitaxe Single ASIC Solo Miner. LFG! David v Goliath! For the People, By the People! @skot9000 @altair_tech @Public_Pool_BTC pic.twitter.com/6me1TCKnnk
— prescott_hodl (@cetraz4) May 5, 2024
Família Completa 😍🥰
Thanks @altair_tech for the opportunity to bring BitAxe content to our country.#TeamNerdMiner #Bitaxe #Bitcoin pic.twitter.com/Q1dy6s1Keh— Berna Cripto ⛏️ (@bernacripto) June 29, 2024
Shoutout to @altair_tech for the massive support on this project! Bitaxe wouldn’t be where it is without them.💪 https://t.co/J5CunjG6VY
— skot (@skot9000) August 1, 2024
We are proud to be distributing hash across the globe. @altair_tech has shipped the Bitaxe to 34 countries and 47 U.S. States.
Which country that is missing will be next on the map? pic.twitter.com/IAyw4phrB5— kevin@altairtech.io (@kevinaltairtech) August 7, 2024
After 2.5 years Satoshi Pacioli is expanding our operations beyond accounting and getting into bitcoin mining. We have acquired approximately 625 GH of miners and are looking for ways to add more. #BitAxe pic.twitter.com/1xnMO9pDtS
— Satoshi Pacioli Accounting (@SatoshiPacioli) August 12, 2024
Frequently Asked Questions
If you need setup support beyond the available instructions provided, we offer one-on-one setup/consulting services that can be purchased separately from our consulting page. We would be happy to guide you through the process.
No, the Bitaxe does not have an Ethernet port. It cannot be hardwired. It only has Wi-Fi connectivity.
This is a learning device aimed at makers, tinkerers and hardware enthusiasts. Low noise, Wifi Connectivity and the ability to run this without connecting to a computer make it an ideal home miner. Profitability will depend on many factors such as power cost, bitcoin price etc.
Yes it can be overclocked or underclocked. Overclocking voids warranty and you may need additional cooling to do it. Here are some overclocking results for the Bitaxe Ultra from a community member, that you can use as a reference.
The AxeOS user interface allows for limited overclocking. For extreme overclocking, you can manually set frequency and core voltage. Please note that manually entering voltage and frequency is risky and not recommended for new users.
If you are an advanced user and comfortable with the risk, the article here explains the procedure.
If you have v2.6.4 or later you can simply amend the browser address while in the settings tab of AxeOS with an “?oc” as indicated below.
The minimum payout on most bitcoin mining pools is too large for sub petahash mining operations. Bitaxe is better suited for lottery mining for a chance at winning 3.125 BTC block reward on solo mining pools like CKSolopool, Kano Solo Pool and Public Pool. Most larger pools will not credit shares that are less than 1 TH/s.
Your Bitaxe will come with preset pool credentials. The default Primary Stratum Host varies by the manufacturer.
It is important to ensure you change the Stratum User Name upon setup. Or, you will not receive a block reward should the device mine a bock.
Note- the if your primary is KanoPool-Solo the user is required to setup an account and provide a payout address for rewards. Reference the instructions on their website. Or, you can change the default to another pool.
The remaining default pools Solo CKPool and Public Pool do not require. They only require the users BTC Address in the Stratum User field.
The default pool when you receive your device is likely Public Pool Or KanoPool-Solo.
As a user you are free to use any pool you like. You can even create your own pool using software like Start 9 or Umbrel fairly simply.
Not many pools accept low shares which the Bitaxe can only produce. A lists of alternative low share pools a include:
The most common mistakes we see for new users is understanding the Wi-Fi bridging process. The goal of setup is to link a mobile device or PC to the Bitaxe SSID via a Wi-Fi Connection. The user must enter into the Network Settings page of the Bitaxe a compatible 2.4Ghz SSID/Network Name and password. It cannot be a 5Ghz signal. Then, restart the device.
Once a successful connection is made the Bitaxe display will show the IP address on the display as indicated in the setup videos. AxeOS can now be accessed locally over the user’s Wi-Fi by entering the IP address into a web browser.
Common mistakes:
- Incorrect Wi-Fi Credentials
Both SSID and Password. The SSID and Password on Wi-Fi routers are case sensitive. The credentials entered into the Bitaxe Settings page must match exactly. Double check spelling and capital lettering versus lowercase lettering. If there is a space before or after with each field it will cause a problem with connection. This is a very common mistake.
If credentials were entered, the device was restarted but the display shows attempting to connect to the Wi-Fi SSID for more than a few moments, it is likely a password issue. Double check the password.
- Not connecting to a 2.4Ghz Wi-Fi signal
Many routers offer dual band or single band options. If you are having issues with a dual band signal search for a 2.4Ghz signal. Keep in mind the password may be different from the other SSID. Also, a Wi-Fi extender may also have a different SSID and Password.
If you are still experiencing issues after confirming credentials Try a hard reset. Unplug the device, let it sit a few seconds and plug it back in. If it does not connect to Wi-Fi and shows an IP at the bottom of the Bitaxe LED, press the boot button and go through the bridging process again.
We do not recommend anything but solo using a Bitaxe. If you are compelled to pool with other miners you may own. We have tested Braiins, ViaBTC, Antpool, Ocean, Nicehash and Lincoin. In our testing Nicehash & Lincoin did not register any valid hashrate for payout. Again, we only recommend solo mining using the Bitaxe or any other low Terahash Miner such as the Canaan Avalon Nano 3 or any Gekko Science device.
Press the ‘Boot’ button and it will reactivate Bitaxe’s device Wi-Fi. You can then connect to this Wi-Fi network and enter your Wi-Fi credentials.
If this doesn’t work, you can turn off the Wi-Fi network Bitaxe is trying to connect by turning off the Wi-Fi router, to break the reconnection loop.
While the odds of hitting the block lottery on a single chip ASIC miner are low, it happens more often than one might imagine. You can calculate these odds using solochance or sololuck.
Yes, someone mined a BTC block with a Bitaxe device in July 2024.
The display is plugged into the PCB and can come loose. If your display is not working, try pressing it down to see if that helps. You can also try opening the enclosure to re-seat the display.
You can see if you look at the PCB the holes are a little offset in attempt to create a better fit. Sometimes they need a little bending.
We would also recommend if the display feels a little loose you bend the prongs on the back of the screen a little bit in an attempt to snug it up.
If your display still does not work, you can purchase a replacement unit here.
AxeOS V2.7.1 includes a display timeout feature. Users can keep the display on by keeping the default setting of “-1” in the field. If you would like the display off type “0”. If you would like the display to power down in 10 minutes type “10” in the Display Timeout field.
- Gh = Hashing speed in Gigahash
- W/TH = Efficiency Watts per Terashash
- A/R = Accepted / Rejected Shares
- BD = Best Difficulty
- Fan = Fanspeed in RPM
- Temp = Temperature at the temperature sensor
- Pwr = Measured Power at the
- mV = Voltage measured in miliVolts
- mA = miliAmperes
- FH = Free Heapmemory on the ESP32S3
- vCore = Measured ASIC Voltage
- IP = The IP Address on your Local Network
The USB-C port on Bitaxe can not be used to power the device. It can be used to directly communicate with the device. However, since Bitaxe has in-built WiFi, most users will never need to use the USB port.
The three heat related reading in AxeOS include:
- ASIC Temperature – The ASIC are sage up to ~70 C and can throttle up to 75 C. You will likely see an error above 70 C. Keep the temp below this.
- Voltage Regulator Temperature – This is the Voltage Regulator Module (VRM) which is located on the back of the PCB. The VRM can reach 120 C before damage. It is recommended to stay under 80 to 90 C by many users. If you are over-clocking the device consideration should be given to provide additional cooling to the VRM. Many use heat sinks and a second fan.
- Fan Speed – This is reported as a percent of the maximum RPM. Stock fans are usually 7,200 RPM. The default cooling setting is automatically controlled by temperature. It can also be set manually. If you are experiencing heat issues it may be helpful to manually change to 100%.
Here is a good article that takes a deep dive into the topic.
If you have changed the settings it is best to go back to default. If you see the overheat error on the OLED you must first reset overheat mode. Then, reset the frequency and core voltage to the defaults. Here is a video showing how to reset the device. When the device overheats it will no longer display the IP address on the OLED. If you do have the IP address saved you can obtain it directly from your router. If you are unsure how how to do this check out the next FAQ: How do I find my IP address.
If your device keeps overheating even on default freq/voltage settings, you likely have a problem with cooling. Inspect your fan and make sure it’s clean and running normally.
Repasting thermal paste might help with cooling. This however is an advanced procedure and voids warranty. If you decide to repaste the chip we recommend a high quality paste like Kryonaut Thermal Grizzy. The procedure for repasting thermal compound is shown in the video below.
AxeSheath enclosure is made up of 2 sections, that snap fit together. It can be removed by prying the 2 pieces apart. Video below shows how this is done with a pencil.
No, Bitaxe only works with 5V power input. 12V power will permanently damage the device.
We do not manufacture Bitaxe but we source them from various US based manufacturers such as OSM & Gekkoscience. We choose our suppliers carefully and ensure their devices deliver the expected performance.
Most manufacturers follow the reference design which is available at Bitaxe.org
Gekkoscience has a modified design and their source files are available for download here.
BTC donation address: bc1qfc5fgpy96z0q6ltvh99pcujec9mwzugv3zcste
Bitaxe can only mine coins that use SHA256d hashing algorithm. This includes BTC, BCH, BSV and a few others.
Download both esp-miner.bin & www.bin files. Make sure the are not renamed. Next, upload both the firmware and web file. Then, restart.
Alternatively, you can update via the USB-C Cable using the Bitaxe Web Flash Tool here. This can be helpful if the unit is not responding via the web user interface. A video describing the process by can be viewed here.
Webflasher allows you to install/update bitaxe firmware. You can also use it to ‘reset’ the device, since installing firmware using web flasher will restore the device to factory settings. There are several videos explaining the process here:
- Bitaxe Resources: Altair Tech Product Listing Page – FAQ, setup instruction & videos https://altairtech.io/product-category/miners/bitaxe/
- Bitaxe main site – https://bitaxe.org/
- Bitaxe Open Source Design Files https://github.com/skot/bitaxe Web Installer – https://wantclue.github.io/bitaxe-web-flasher/
- OSMU (Support & Information) https://discord.gg/osmu
- OSMU – Wiki https://osmu.wiki/
Bitaxes are great learning devices to understand how mining works. If you’re looking level up and increase your hashrate we would highly recommend checking out our Loki Rigs. These are 120V ready, Wifi Enabled , quiet miners ideal for home use. They also double up as space heaters and offer an excellent $/Terahash value at new-gen mining efficiencies. With higher hashrate they also enable mining on a pool with periodic payouts.
This generally happens after installing incorrect firmware or when there’s no firmware on the ESP32. Hold down Boot and press Reset, to enter firmware download mode. Then use bitaxe webflasher to flash the correct firmware on your device.
You do not need to upgrade the heat sink or fan on your Bitaxe. Although typically when upgrading your fan or heat sink it will allow your Bitaxe to run more efficiently. You can find accessories here
duarteb (verified owner) –
Fast delivery to France from USA in 3 days
Thanks a lot
Simon Green (verified owner) –
Super quick delivery to Canada, works great!
Robert (verified owner) –
Outstanding fabrication of the BitAxe with BM1368 ASIC. 0.7 TH/s or better with TLC. Near instant delivery!
alexandersonmiranda (verified owner) –
Well-built premium product. Very fast delivery to Brazil 7 days. The store is very good and I recommend it.
Jeff Buddenhagen (verified owner) –
The best of the best
Jonathan Nehrebecky (verified owner) –
Able to pick this up when all other shops were OoS. Altair is a wonderful shop and their customer service is 2nd to none! Shop w/ confidence and hash on…
Elise (verified owner) –
Love my bitaxe! Easy to set up!
Troy Barsten (verified owner) –
Just got it up and running. fantastic idea. Great product. My only comment would be very clear newbie Step-by-step instructions for those unfamiliar with crypto. I used it to get a grasp on how to even start ASIC mining. And even though I’m knowledgeable about mining I can see those who are brand new struggling.
Rogério Nassar Ferreira Silva (verified owner) –
Produto apresentando problemas de travamento e interrupção de mineração com menos de 1 minuto de mineração.
Kevin (store manager) –
Rogério, if you are still having issues please feel free to reach out. The best way to contact us is via the chat on our site. We generally respond quickly. I have send an email to the one we have on file in response to your comment. Kevin M.
Anonymous (verified owner) –
Gregg B. (verified owner) –
Would be a 5 if it could connect wired.
Christopher (verified owner) –
Great product; easy to set up with Altair’s instructions
Peter G. (verified owner) –
Product arrived fast and is currently running like a champ
Joseph (verified owner) –
A little difficult to set up, besides that it’s hashn!
Javad (verified owner) –
Thank You, Order was Delivered Fast.
Daniel S. (verified owner) –
If you’re not to savy with tech then you’ll have to watch some YouTube videos on how to configure and setup etc. if you run into problems. I did the first week but ended up fixing it with YouTube videos and discord questions. Cross my fingers I get a full block.
Luke H. (verified owner) –
Great experience and easy setup…love the Bitaxe thanks!
Anonymous (verified owner) –
Real slick – package came within a week and works like a charm, appreciate it.
Edwin (verified owner) –
Excellent. Only issue I’ve had so far is one of the miners constantly runs hotter than the others. Not sure what’s up with it.
Ryan (verified owner) –
Wont connect to internet no matter what i try , and theres no help out there to fix this issue , so not happy at all
Altair_Admin (store manager) –
Hi Ryan,
Sorry to hear about the issue you are facing. Your device is covered by our warranty and we also provide set-up support. Please reach out to us at help@altairtech.io and we can help you get set up or replace your device.
John (verified owner) –
Easy to set up once you watch a few videos.
Luke Hall (verified owner) –
The Bitaxe that I ordered stopped working within days of receiving it. I have tried getting help via email and you have yet to respond to me. I will never purchase another product from you again.
Altair_Admin (store manager) –
Hi Luke, Sorry to hear about the issue you are facing. I searched through our support tickets and emails and do not see any email from you. Rest assured, your device is covered by our warranty and we will help resolve the issue. Please reach out to us at help@altairtech.io or via chat bubble on the website and we can help you with troubleshooting.
Damon L. (verified owner) –
Easy setup, good information. It lets you make adjustments to run faster to max out the chip.
Now- just waiting for my $$
Chris (verified owner) –
Slick, small, easy to set up, efficient asic miners for beginners. Best way to participate in securing the network.
Sergio (verified owner) –
It’s a brick. Tried to connect with a phone and a laptop. Even created a separate network for it. My friend who has one also tried woth his network, computer, and two phones.
It’s a paper weight with a fan on it.
Rene Lemoine (verified owner) –
Order shipped quicker than quoted!
Lawrence (verified owner) –
Bought 1 Bitaxe Gamma and added the Ice-Tower synch. Bought another one with them already built. I was told they would ultimately be the same, not true. The one that is already together produces a lot better hash 25% more than the one I assembled per their instructions. If I had known that I would always but the assembled choice.
Michael H. (verified owner) –
I am a complete noob and couldn’t be more satisfied with the Bitaxe Gamma 601. Setup and startup was quick, simple, and issue-free. It runs faster, more efficient, and cooler than expected. I probably won’t solo a block, but the chance is greater than zero and I’m glad that it was so easy to get started in mining – I just wish I could have bought one of these 10 years ago.
Bill (verified owner) –
Perfect!
Adan C. (verified owner) –
This miner is awesome it draws about the same amount of power as a phone charger. It’s super quiet compared to other miners, I sometimes look at just to see if it’s still running by how quiet it is.
JACK ADAMS (verified owner) –
It’s been weeks now and the Bitaxe Gama still has not arrived. UPS is VERY slow
S B (verified owner) –
Great value
Ian (verified owner) –
Looking forward to setting this machine up. Received in great time from the US to Australia.
Brian Scanlon (verified owner) –
Can i return this & how do i send it back – I can not get the IP address to show up in the screen & no one seems to be able to assist so I can’t get to mining
Kevin (store manager) –
Hi Brian, sorry to hear you are having issues. I see you reached out. Our support chat failed to pass you onto an operator. We have been working on it recently to better support customers. When you see the Connecting to SSID: This is Step one in the instructions here: https://www.tidio.com/panel/inbox/conversations/operator-3375765/3e18114d139548db877e7ed13af4d354 The Bitaxe requires to be bridged to the local Wi-Fi using a mobile device or PC to create an internet connection.
Please feel free to reach out via our chat if you have have not been able to complete the setup. You can ask to speak with an operator and we will respond as soon as possible.
Manuel O. (verified owner) –
Really nice customer service and quick being in the USA. Going to be ordering more in a few months. Thank you team 🙏 😊
Jeffry E. (verified owner) –
Altair is amazing and the device was easy to setup!! Even had a small hiccup that they quickly resolved! A+ company and I will buy from them again. Thank you 🇺🇸
Anonymous (verified owner) –
Patrick (verified owner) –
Michael Curley (verified owner) –
Anonymous (verified owner) –
Great experience and product as described. Proved to be a trustworthy company and will deal with them again in the future.
Joseph B. (verified owner) –
Quick support and led me right to the problem. Highly recommended!
Travis M. (verified owner) –
Tried getting everything set up followed the steps device wasn’t working out of the box went straight to overheat mode was troubleshooting through email with altair tech tried all there steps with no luck i got the device running but you can’t put it to default settings without it overheating pretty bummed
Steven Hart (verified owner) –
Awesome service
Mark C. (verified owner) –
Awesome, will buy from Altair anytime !!! Great customer Service.
Dennis B. (verified owner) –
Interesting Miner. Hums right along, looking for that big win along with my other Lottery devices.
Anonymous (verified owner) –
Received the product and noticed high temperatures (60c at default) compared to Reddit. I noticed that the fins would never be super hot and tried to repaste. Instantly saw 37C. Would be 5 if I hadn’t had to spend a lot of time researching and troubleshooting.
THOMAS (verified owner) –
Fantastic customer service could not ask for anything better!
Jeremy (verified owner) –
Fast shipping, easy setup, highly recommend!
Eric (verified owner) –
Received it quickly and set up was easy.
Russell M. (verified owner) –
Quick shipment. I am enjoying just watching it mine.
David Mitchell (verified owner) –
I have 6. 3 Gammas and 3 Supras all work great!
Paul (verified owner) –
I would like a detailed setup guide for those of us NOOBs. Especially stratum user setup. Ty
William Anderson (verified owner) –
Unlike the gama I bought on Amazon, Altair’s came with the latest firmware version already loaded on it. Good communication, fast shipping, I couldn’t be happier. Thank you, and thank you voskcoin for tell me about Altair 🙂
Theodor Florin Lefter (verified owner) –
bought 3, 2 work: one good, one so-so, one not
Troy Lippincott (verified owner) –
Had to add a second fan
Jeff (verified owner) –
Undisputed Kings of Miner Sales…Superior quality, Superior Shipping, Superior customer service.
Paul Arias (verified owner) –
Initially had trouble connecting to Bitaxe gamma wifi setup screen. Was finally able to connect to Public pool and mine. Got new Umbel home server, setup Bitcoin node and wanted to connect to Pubic Pool thru Umbrel app, but could not get back to Bitaxe Setup screen, even after firmware upgrade on Bitaxe, unable to change initial configuration settings. Bitaxe needs better WiFi setup options.
Anonymous (verified owner) –
Anonymous (verified owner) –
Jacob F. (verified owner) –
Excellent product
talitaM (verified owner) –
I received the bitaxe in six business days. The service before the sale was efficient, I had my questions answered, so I paid the import fees and courier in advance when I bought it, I saved money and it arrived quickly. The product works well, volts at 1060, above that it gets hot, but it continues at the advertised speed. It came with the cover, although I didn’t ask for it. I’m happy with the purchase, I hope it’s my lucky bitaxe.
Kimberly Bullis (verified owner) –
It gives no instructions on how to do settings.. it only gets 12 GH/s sad and pathetic… I could have bought $200 in bitcoin and been much better off
Kris Konicki (store manager) –
Hello, Kimberly. I hope you were able to get your Bitaxe up and running. We try to provide setup instructions on the product page as well as provide information in our FAQ. You can also find initial setup videos near the bottom of the product page. If your still having issues, please submit a support ticket and we will do our best to help.
Michael B. (verified owner) –
Arrived quick! Easy setup with videos on the website.
Joseph (verified owner) –
Super cool mining rig. Easy set up, have been running smooth for a little over a week
Karen Amezquita (verified owner) –
It’s pretty easy to set up and start mining, it takes no more than 30 minutes. If you plug in your Bitaxe and the display doesn’t show anything, push the reset button and it’s done. You need to have 2.4 GHz WiFi, but if your modem has 5 GHz and 2.4 GHz WiFi, you have no problem.
Nikolas (verified owner) –
Hell yeah, I’m mining bitcoin!
Norman Cohen (verified owner) –
I love it , can’t wait to buy more
Julian W. (verified owner) –
The vr temps were 93c out the box after running for about 30 minutes i put a usb fan blowing air on the back now it’s 62c but outside of that it works like a charm
Douglas S. (verified owner) –
Great company, great service and follow up
Johnathon Y. (verified owner) –
Quality product, excellent customer service!
Charles M. (verified owner) –
I’ve been buying BitAxe Gammas from Altair for the last few months. Very happy with their product and service. Easy to communicate with and fast shipping. It’s nice to have a U.S.-based supplier. No need to worry about tariffs or duties holding up my shipping.
Kevin (store manager) –
We appreciate you choosing us Charles.
Will Golpe (verified owner) –
It was a nice unit and it was easy to set up. However, after the initial set up, I did see that there was more recent official firmware. After updating the firmware, I was unable to get the unit to work appropriately as it would constantly give me a low-voltage message and drop all current going to the asic chip.
I ordered a secondary and a 3rd power supply and oddly enough the 3rd power supply had the same case markings but a different sticker. With both of those power supplies, the unit has been functional. So, my only disappointment is really in the power supply as that prevented the unit from running.
Anonymous (verified owner) –
Jason E. (verified owner) –
Great miner. Initially I had issues but Altair addressed them promptly and got me hashing in no time.
Paul W. (verified owner) –
Very easy to set up. Been up for 4 days now. No problems.
James (verified owner) –
No RMA
Anonymous (verified owner) –
Quick shipment and everything as mentioned on webpage. Altairtech can be fully recommended.
Anonymous (verified owner) –
Top of the top for products, service and delivery. A++
Anonymous (verified owner) –
Works great! Easy to set up, and it doesn’t make any noise!
Michael Koziol (verified owner) –
Michael Koziol (verified owner) –
Masakazu (verified owner) –
Arrived on time and in excellent conditions. This is my fifth bitaxe gamma, this time with the ice tower, and it’s the best performing one. I’ve placed ice towers, also purchased from Altair, on the other ones, and they’re doing great as well, but the one I got with it pre installed is the one I can overclock the most reaching well over 2 th/s and could probably push it more, but will wait till heat of the incoming summer is gone. Another thing I’d like to point out is that last time they forgot to include an EU plug adapter. For the minor mistake, they gave me a $10 discount coupon, and in the last order they’ve included an extra EU plug adapter. Altair really looks after their customers beyond expectations. Highly professional and highly recommend doing business with them.
James Saunders (verified owner) –
I love the product. Works great and is teaching me how decentralized mining works. Thanks a bunch for everything.
Christian Caratachea (verified owner) –
The first of my collection.
I loved it & I still do; I’ve been mining since I got it.
Robert (verified owner) –
Anonymous (verified owner) –
Jack P. (verified owner) –
Fantastic product
David S. (verified owner) –
Easy transaction. My only critique is there was no instruction regarding how to set up the device.
Darrel M. (verified owner) –
Excellent product and fast delivery! Definitely buy from them again.
Chris W. (verified owner) –
SUPER FAST Shipping!!!!!… Was very impressed how fast my order arrived! Packaged well and working as expected! Very Happy! Def recommend….